Tandem Press Brake

This Machine Was Combined By Two Sets Of 300 Tons Press Brake. Tandem Achieve Synchronization Working. Single Machine Was Combined By Worktable Ram And Right And Left Wall Board. Wall Board Adopt Assemble Structure Due To The Transportation. The Rack Has Enough Rigidity. Two Cylinders Install To The Right And Left Wall Board, Under The Effect Of Electric Operation System, Drive The Slider Running Down. On Slide There Is Upper Dies, When Upper And Lower Dies Touch Workpieces, System Raise Pressure, Form The Workpieces. Use Different Dies, Under Different Bending, Can Get The Different Types Of Workpieces. The Quality Is Reliable And Stable.

Technique Parameters Of Machine

SN

Description

Value

Unit

1

Nominal Pressure

2*3000

KN

2

Length Of Worktable

2*6000

MM

3

Max Slider Stroke

250

MM

4

Max Opening Height

770

MM

5

Throat Depth

650

MM

6

Power

2*22

KW

7

Figure

L

12000(Tandem)

MM

W

2300

MM

H

4800

MM

8

Gross Weight

72000

KG

 Major Spare Parts Suppliers

SNNameSpec.QtySuppliers
1Oil Pump25 Above Capacity2setsShanghai Qigao Pump
2Motor22KW2setsSiemens Beider
3Adjustable Motor1.1KW4setsSiemens Beider
4SealingFull Sets2setsJapan
5Electric Components 2setsSchneider
6Hydraulic Oil46# Anti-Wear Hydraulic Fluid12barrelShanghai(By Users)
7Hydraulic Valve StackProfessional System2setsHome Made
8Cylinder Of Press BrakeProfessional Cylinders2setsHome Made

Trapezoidal Shearing Machine

The trapezoidal shearing machine Is Suitable For The Plate Cutting Processing Specially The Long Plate. Easy Of Operating And Processing Of Optional Length Of The Plate Make The Machine Productive. Pressing The Plate Which Needs To Cut To Walking-Equipment Through The Hydraulic Cylinder And Shear It By Revolving Cutter Accompanied The Movement Of The Walking-Equipment. It Can Also Cuts Taper Plate According To The Request Inclination. Therefore, This Machine Widely Used In The Processing Of Light Pole, Vessel, Metal Structure, Ships, Building, Hardware And So On.

Characteristic

(1)The Cutter Discs, Which Are Driven By The Speed Reducer Powered Through The Electrical Machinery, Are Installed On Two Spindles. They Have Excellent Performance Of Adjustable Rate, No Noise, And Simple Operation. The Vice Spindle Is Spearheaded By The Speed Reducer To Make The Cutter Heads To Roll. Made By The 6crwzsi Material, The Cutters Have High Shearing Strength, Good Mechanical Properties, And Long Service Life.

(2)Driven By The Speed Reducer Powered Through The Electrical Machinery, The Running Gear Moves Steadily On The Wheel Of The Railway Track. The Transmission Is Reliable, And The Adjustable Speed Coordinates The Hob.  Pressed On The Running Gear By Several Hydraulic Cylinders, Plates Are Sheared With Accurate Size.

(3)With Thick Plate Welding And Partial Structure, The Running Gear Is Easy To Transport And Install. And The Shearing Length Can Lengthen Or Shorten According To Requirements.

(4)With Simple Structure, The Feeding Device Equips With 4-5 Stop Points And A Hydraulic Cylinder To Control The Materials. And The Shearing Thickness Is Adjustable. Trapezoidal Plates Can Be Sheared Directly Without Drawing. Thus, The Operation Is Very Simple.

(5)In The Electric Appliance Design, Rolling Cutter And Walking Installment Are Controlled Separately. There Is No Linkage Between Clamping Cylinder And Drive Motor Which Guarantees The Operation Is Safe, Convenient And Reliable.

Main Spare Parts Supplier

SNNameSpec.QtySupplier
1Oil Pump25 Above Displacement1setShanghai
2Oil Pump Motor11 KW1setSiemens
3Gear Pump25 Above Displacement1setHuaiyin
4Gear Pump Motor3 KW1setSiemens
5Walking GearNgw111setTaixing
6Rolling Shear Gear HeadBwd2202setsDajiang
7Walking Speed Motor4 KW1setSiemens
8Rolling Shear Head Motor3 KW2setsSiemens
9Feeding Device Motor3 KW1setsSiemens
10Round Blade4002pcsChangzhou
11SealingsFull Set1setImport From Japan
12Electric Components 1setSchneider
13Hydraulic Oil46# Anti-Wear1.5BarrelShanghai(Charged By User)
14Hydraulic Valve StackProfessional System1setHome Made
15Pressure And Feeding CylinderProfessional System1setHome Made

Cut To Length Line

This automatic production line is used to decoiling, flattening and cutting the steel coil to required size. After feeding the coil head into leveling machine, other movement will be controlled automatically with the parameter of speed, cutting length, cutting number, which is input by operator from touchscreen.

The production line is composed of loading trolley, two-cone no harmomegathus type decoiler, plate leading device, 11 rollers straightening machine, transition swing bridge, side guide device, 5 rollers leveling and pinch sizing roll, shears(pneumatic clutch), convey belt, pneumatic blanking frame, lift platform, plate discharge car(side discharge, back discharge), and so on.

Production line technological process as follows:

Coil loading → decoiling → plate leading → leveling → plate storage → correct and centering → leveling → sizing → cutting → stacking

This line is centralized controlled by PLC, control console has the function of length setting, digital display, automatic counting, continuous cutting, failure warning and so on. The line arranged compact, sizing of plate use import servo motor, with high sizing precision.

SNNameOriginal
1Touch screenTaida
2PLCTaida
3Servo motor and driverYaskawa Japan
4BearingHa, Wa, Luo
5Pneumatic piecesAirTAC
6Solenoid valveAirTAC
7Air cylinderJiangsu
8Hydraulic solenoid valveYUKEN
9CylinderJiangsu

Pole Welding Machine

This Machine Composed By Main Machine Head, Tractive Body And Feeding Shelf. Tractive Body Was Moved By Collet In Small Vehicle Nipping The Steel Pole’s Collet. When The Small Vehicle Moved, Driven Steel Pole, From Small Collet To Big Collet, Regularity Moved. The Big Side Of The Steel Pole Was Hold By Feeding Vehicle, Force Automatic Sewing From Head Of Machine To Steerable Wheel. At One Time, The Welding Machine Starts Welding. This Machine Adopt Multiple Wire Submerged Arc Welding, Solder Was Reclaimed Automatic. Welding Line Was Symmetrical And Slinky. It Has Strong Filter, Forming One Time, And Be With High Welding Efficiency. The Speed Of Welding Achieve 2 To 3 Meters Per Minutes, Is About 3 Times Of The Gas Welding .The Cost Of The Welding Is Lower Than Gas Welding. It Is With Speedy Welding, High Efficiency, And Good Price In China Light Poles Industry Now.

SNNameSpec.QtySupplier
1Gear Pump25 Above Displacement1setHuaiyin
2Gear Pump Motor3KW1steSiemens Beide
3Bencher3KW1setSiemens Beide
4ReducerBwd2201setDajiang
5SealingFull Sets1setImport From Japan
6Electric Components 1setSchneider
7Hydraulic Oil46# Anti-Wear Hydraulic Oil1barrelShanghai(Charged By User)
8Bearings 1setHarbin
9Hydraulic Valve StackDedicated System1setHome Made
10CylinderSpecial Cylinder1setHome Made
11Submerged Arc Welding Machine630A1setShanghai
12Wire Feeding 1setShanghai
13Recycling Machine 1setWuxi
14Line Panel 1pcsHome Made

Pipe Necking Machine

This Equipment Combined By Main Upper Cylinder, Upper Pressure Rack horizontal Rack, Hydraulic System And Electric System. Cylinder Piston Rod Move Freely In The Rack, Ensure That The Walking Motion Partial .Upper Pressure Rack Can Press The Pipe, Horizontal Rack Has Many Groups Of Card Board To Ensure That The Steel Rods Can’t Be Rotate. With Different Kinds Of Specifications Tools, It Can Neck Pipe With 220mm Diameter And 6mm Below Thickness.